2″ Disk Tower

A modular approach to disk storage.
Each “floor” of the disk tower has two side by side compartments that holds about a 2″ stack of disks and a generous area to get your fingers into to stack and remove.
You choose 3 or 4 floors and are held together by stainless rods with nobs on the top.

How many floors do you need? Well, you can choose a 3 floor and use one side of each floor per grit and you could store 80,120,180,240,320,400 and that would give you storage for at least 50 of each of those grits, or any grits.
A 4 floor would add 600 and 800 frit. Or it you wanted more storage, you could do at least 100 each of 80,120,180,240 (or any 4 grits)

Price included magnets on the top and bottom floors as well as the bottom of the base.

We use rare Earth magnets, two on the back of the top and bottom floor and two on the bottom floor.
We can mix and match some colors on things like the knobs, the base and the top, or go wild and lets do a color scheme personalized to you, subject to material availability.

All of this is made in our shop in Texas, so definitely Made in the USA!

If you want to wall mount, get the wall mount kit (mounting hardware not included). The wall mount kit included two back plates with washers that can be screwed into the wall or onto peg board. The magnets hold the Tower onto the wall mounts